Tankless Water Heater Repair Flower Mound

Tankless Water Heater Repair Flower Mound TX Troubleshooting

Usually, quite a few of the troubles that could take place with a tankless water heater, triggering it to require a repair are external aspects. Below are a few of them:

Poor venting. The most usual mistake with a tankless installation is using regular B-vent, which can swiftly damage the heat exchanger due to acidic condensation.
Improper sized gas supply line. Often the supply line is undersized and was simply attached to the existing line size. The size specified in the setup handbook has to be utilized.
The gas pressure is not right. The working pressure must be from 5 to 10 1/2 inches WC for Natural Gas and 9 1/2 to 14 inches for Liquid Propane, relying on the design.
The incorrect kind of gas that is being made use of – natural gas or liquid propane. It is not possible to make use of the non-specified kind.
Water flow or temperature level variation problems. There are numerous things we will examine to make certain they are working appropriately, like cleaning or changing the input filter, analyzing the check valve, examining the seals in the faucets and searching to find out if one will find a cross flow someplace that needs to be taken care of.
Hard Water Problems: In locations where the water is really hard, de-scaling will be required occasionally.
Environmental concerns. The heaters must be set up in a clean location with access to combustion air that is devoid of dust, lint, grease, or chemicals.

Do not be reluctant to inform us of any problems you are receiving with your tankless hot water heater, or if you merely would like some info on determining if obtaining one might be a good solution for your household.

Tankless Water Heater Repair Flower Mound

Tankless Water Heater Repair Flower Mound TX

Back to Water Heater Repair Flower Mound