Water Heater Repair Flower Mound Blog

Flower Mound TX Homeowner advice and maintenance tips for water heaters.

Steps to Improve Water Heater Efficiency

With the winter weather ramping up, experiencing a hot bath and washing dishes using hot water can often be luxurious! However if one’s water heater is taking too long to heat up the water, everyday life can get aggravating and the winter season can seem even colder. It is really important, if there is an apparent variance in one’s water heater’s effectiveness through cold weather, to get the water heater looked at by us. Even so, there are a few maintenance tasks that any homeowner may attempt that may significantly affect the performance of the water heater, and help avoid the necessity of a Flower Mound Water Heater Repair.

Maintenance Tasks to Increase Flower Mound Water Heater EfficiencyFlower Mound Water Heater Efficiency

The first thing one ought of do if encountering a hot water concern is to check out the area nearby the water heater. If the water heater is placed in a basement, in particular an unfinished basement, it might be too cold. It would certainly benefit the hot water heater and, consequently, the water that makes its way into one’s residence, to get the area around the water heater well insulated and not drafty. Furthermore, the hot water lines that carry the hot water from the water heater to the taps in the house may be becoming cold and cooling down the water on the journey. It’s easy to wrap pipe insulation around the water line, and the affect may be significant!

Dip Tube Care

Many water heaters contain a dip tube, which is a little tube at the bottom of the tank that allows cold water in the tank without cooling the stored hot water near the top. The dip tube is plastic, though, and can break or fracture. If the dip tube is broken, cold water may get into the hot water storage, which will lead to the water running in the residence to be cooler than expected. Thankfully, it is quite simple to change the majority of dip tubes.

Water Heater Blankets

These types of uniquely made blankets cover up the water heater and keep the temperature of the water constant. One may need to think about a water heater blanket if the water heater is cold to the touch. If a blanket must be used, one will be able to move the temperature setting lower a little bit as the blanket will be able to heat the water, up to ten degrees above where its set.

If every one of these servicing duties were tested and one is still having problems with the temperature of the water, give us a call! One of our experts may need to have a look at the heating element or maybe the pilot burner. Regardless of the issue, we will have ones water heater operating at top efficiency swiftly!

Removing Water Heater Odors

Whenever the water coming from the taps inside the house doesn’t smell good, there might be a problem with your hot water heater. There are a couple of various causes of stinky water, yet the leading cause is bacteria. In the event that bacteria is coming into the water, an odor may show up. Well water is usually responsible for this developing. Even so, there are some methods a Flower Mound homeowner may take to stop bacteria from growing in their water and to get rid of present bacteria and odors.

According to Soquel Creek Water District, “The smell is the result of four factors that must all be present for the odor to develop. These factors include:

  • A high concentration of sulfate in the raw water
  • Sulfate reducing bacteria, non-toxic to humans (sulfate is reduced to a sulfide state by the bacteria)
  • Little or no dissolved oxygen in the water
  • Hydrogen (a component of water which may be present due to water conditions reacting with the anode)”  Read more here…

Controlling Water Heater Bacteria Growth

The easiest way to stop bacteria from growing and creating unpleasant tastes and odors in one’s property, is to make certain the temperature is set at 140 degrees or higher on one’s water heater. In this climate bacteria are unable to expand and will be killed. When your water heater temp is placed any lower than this, bacteria will not only survive but will be able to multiply.

Getting Rid of Hot Water Heater BacteriaEliminating Flower MoundWater Heater Odors

In order to remove present bacteria and smells, one will have to apply harsh chemicals to remove it. Chlorine bleach is the most powerful and comprehensive chemical cleaner to use. If you are making an attempt to clean out the water and kill the bacteria utilizing bleach yourself, make sure you have an understanding of the precise technique of doing this. First, the electric or gas going to the hot water heater needs to be turned off. Then the cold water supply will have to be turned off. Then, you will have to turn on one of the hot water taps inside the home. This lets air in the tank. Working with a garden hose, drain the water out of the hot water heater and close the drain valve after all of the water has been drained. After that, it is time to pour in the bleach. One will need five ounces of bleach for every gallon of water the tank holds. Remove the flexible cold water hose and pour the bleach into the opening. In the event the cold water hose is not flexible, it may be a good idea to contact a specialist. Hook up the water line once more and refill the tank with water. It’s necessary to close the hot water faucet in the house as soon as all of the air is out of the pipe. It’s likewise important to run each one of the taps that use hot water throughout the home until you can smell the bleach. The bacteria that is in the water heater could also be in water lines and faucets so you must kill the bacteria in those places at the same time. Allow the bleach water sit in the tank and inside the pipes for nearly 3 hours while not using any hot water. And then one more flush is in order. As soon as the tank is cleared once more, don’t add more bleach but fill it up with water and give it time to sit in the tank and in the pipes for at least thirty minutes. Finally, drain the water yet again and replenish the tank with water. Let all of the hot water appliances in the house run until you can not smell bleach. Either turn the power on again or reignite the pilot light and you should be all set!

For any inquiries about water smell, flushing a water heater, Flower Mound water heater repairs, or other water heater problems, give us a call!

Minimize Water Heater Energy Usage

Water heaters are an out of sight, out of mind device. One good thing is they are typically manufactured to be so. Even with hot water heaters at this time in the marketplace being well made with energy performance in mind, there are items house owners are able to do to stretch ones water heating energy bill further.

Where to Reduce Ones Flower Mound Water Heating Expenses

Verify the Thermostat Temperature SettingFlower Mound Water Heating Cost Savings

If you haven’t looked at the temperature level the hot water heater is fixed at, now is the right moment to do this. The factory setting is usually around 140 degrees. Most property owners do not require it to be fixed that high except in cases where there are some health issues one has. There is additional information on water heater temperature options right here. Even changing down the temperature by 10°F can reduce energy expenses by about $6 per month. The ordinary house owner doesn’t have to set the water heater beyond 120°, so consider turning yours lower if it is.

Reduce Hot Water Usage

Right here are some thoughts to be able to help reduce the hot water usage at home while not having a whole lot of effect on how one lives.
Clean the the greater part of clothes in the washer in cold water: A lot of laundry detergents are intended for cold water use currently therefore make use of them.
Take showers as opposed to baths. On average, baths use 12-15 gallons of water, whereas showers usually only take 5-9 gallons.
If renovating or changing sink faucets, add dual handle faucets. Single handle faucet will use a little hot water when it is unnecessary. Even when the handle is moved straight up causes hot water to be used. Single handle faucets can help get rid of the use of hot water any time it is not needed.

Repair all water drips and also leaks. We will not go into detail right here, but, actually a small drip can add up to a significant amount of water over the span of a month! Make certain to get any faucet drip fixed as quickly as possible.

Adding Insulation to the Water Heater

It is good to insulate the water heater and the hot water plumbing. Insulated wraps can be bought to cover the storage tank in order to keep the stored heated up water hot. Todays water heaters are designed with good built-in insulation of the water storage tank, however every little bit may also help, particularly if the water heater is situated within a non-heated part of the home, such as a garage. All hot water pipes exiting the water heater really should be covered in pipe insulation as well. It is particularly vital for pipes that go through a garage, crawl space, or other area not warm.

Flush the Water Heater Regularly

Homeowners need to make sure they’re doing a little normal maintenance on the water heater to ensure it functions as smoothly as feasible. This helps to save on energy usage and extend the life of the hot water heater. Through flushing the storage tank and inspecting the anode rod will go a long way in doing this.

Install a More Efficient Water Heater

Whenever it is time for a new water heater, purchase one which is as energy efficient as you can afford to purchase. Over the long haul it can surely pay off!

If you have any concerns about a Flower Mound water heater repair or if you are unsure if it is getting close to needing a new water heater, do not be reluctant to call us.

Keeping a Healthy Water Heater

A lot of people can count on one hand how many instances they have had to replace a water heater. Which is a very good point! Traditionally, a household’s water heater lasts many years without needing to have any repairs done to it. Water Heater Repair Flower Mound hopes that property owners do conduct some important routine maintenance to their heaters to receive the longest lifetime attainable from the product, but we understand that a lot of house owners do not give it a lot of thought since they operate so good.

Motives to Keep a Healthy Flower Mound Water Heater

The general life of a hot water heater can differ, dependent on the make, water conditions, the mineral density of the water, and the quantity of annual upkeep it gets. A standard average is 8 to 10 years, nevertheless a lot can last longer than that for certain. Certainly one of the major motives for usual water heater maintenance is so that you can spend less money throughout those 8 to 10 while operating it. Needless to say, the less energy it makes use of will in addition aid our ecosystem as well.

Mineral deposits accumulating on the inside of the storage tank are among the major factors why water heaters give out and require a lot more energy to perform. This is a normal event. Interior components referred to as the anode rods, alleviate problems with this in addition to the production of rust within the storage tank, but an annual water flush or drain, should help reduce the unwanted collection of debris on the inside. Even if a container full of water is drained once or 2 times each year to discover the amount of sediment is in the water, if helpful. If the water is extremely filthy, an entire flush should really be conducted. We will not go into the actions on this subject in this article, but we can unquestionably assist our Flower Mound neighbors on this.

Flower Mound Water Heater Repair SignsFlower Mound Water Heater Repair

The biggest indicator that ones water heater necessities a service repair, is when there is any water identified close to the unit. This warning can very often be stopped with maintaining a good eye on the subsequent indicators. Actually check for moisture of any sort, not only a sizeable puddle of water directly below the heater.

Popping or gurgling noises – as soon as more substantial mineral deposits form on the inside of the storage tank, the water within will likely make odd noises as the cooler water combines with the hot water. An effective flushing of the storage tank traditionally alleviates the sounds.

Stained water from ones hot water taps is an indication there quite possibly is rust in the water, notably when it’s not doing this with the cold water tap.

Water is not really becoming as hot as it regularly does is an effective hint that something is not correct with the heater.

Hot water smells can also occur as well, and we can certainly help address those difficulties also. The smell could possibly be as a result of shifts in the water supply and are not linked to ones water heater, but we may also help check it to verify.

Don’t be reluctant to get hold of Hot Water Heater Repair Flower Mound with any problems you have concerning handling your water heater, for we are always here to help!

Flower Mound Water Heater Repair Company Video

We absolutely love taking care of Water Heater Heater Repairs in Flower Mound and enjoy assisting so many of our neighborhood friends. Come back here in our blog for we are going to continue to include suggestions on water heater maintenance and common care.

We desire to share our brand new company introduction video to you below.

We are additionally accessible to assist you with every other kind of plumbing repair you may need carried out. Whether it is a leaking faucet, drain cleaning, toilet repair, or leak detection. We have witnessed nearly any sort of emergency plumbing and water heater repair problem you can envision and look forward to utilizing our well crafted troubleshooting knowledge!

If it happens to be near to the period for a water heater replacement inform us so we might help with deciding on the best suited style of water heater for your property or workplace.